400-Foot Roll / 400-Foot Load

Last Updated 1 week ago

Filmmaking Dictionary: Number 4 / 400-Foot Roll / 400-Foot Load

Definition

A 400-foot roll contains a nominal 400 feet of motion-picture film, approximately 121.9 metres. A 400-foot load commonly refers to film prepared for a camera magazine of that capacity.

The length does not specify one recording duration. Film gauge, perforations per frame and camera speed determine how quickly the camera uses the stock.

Approximate Running Times

At 24 fps, common planning figures for a nominal 400-foot roll include:

  • 35mm, 4-perf: About 4 minutes 26 seconds.
  • 35mm, 3-perf: About 5 minutes 55 seconds.
  • 35mm, 2-perf: About 8 minutes 53 seconds.
  • 16mm: About 11 minutes 7 seconds.

These are nominal figures. The usable duration is affected by loading, threading, run-up, testing and the production’s handling allowances. Do not promise a take that consumes the entire theoretical roll.


Advertisement

Frame Rate Changes the Duration

Doubling the camera speed uses twice as many frames per second and roughly halves the available running time for the same format. A roll adequate for a normal-speed dialogue take may be much too short for an extended high-speed setup.

For example, a 4-perf 35mm camera running at 48 fps consumes a 400-foot roll in roughly half the time it would at 24 fps. The camera team needs to plan the action, run-up and reload around that faster consumption.

Magazine and Stock Compatibility

The camera magazine must be appropriate for the film gauge, loading arrangement and intended capacity. ‘400-foot’ does not make different magazines interchangeable. The camera assistant follows the equipment’s loading procedure and the production’s system for identifying fresh, loaded and exposed stock.

Clear roll labels and camera reports help connect footage to scenes and takes after the film leaves the set. Short ends and recans need accurate length and handling information rather than being treated as untouched full rolls.

Production Checks

  • Calculate duration for the actual gauge, movement and frame rate.
  • Allow for waste and the required reserve.
  • Coordinate long takes with the camera team before rolling.
  • Record roll identity and relevant stock information.
  • Keep the lab and editorial paperwork consistent.
  • Check remaining footage using the camera team’s established procedure.

Advertisement

Frequently Asked Questions

Does a 400-foot roll always last ten minutes?
No. That approximation is only relevant to particular formats and speeds.

Is a 400-foot load a digital file-size measure?
No. It refers to physical film length.

Related Terms

Browse all terms starting with 4 or return to the filmmaking dictionary.

Item added to cart.
0 items - $0.00